Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Sort By:
1 2 3 ... 18
Speeco 07090100/2702 Standard Tractor Lynch Pin Speeco 07091900/3548 Standard Tractor Lynch Pin Speeco 07090400/2704 Standard Tractor Lynch Pin
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Campbell T7665012 Welded Ring QUICK LINK ZN 3/16            Campbell T5950124 Repair Lap Link
Campbell Welded Ring, 1 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity Factory number indicated thickness (inches). For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
Fehr Bros 3/16 Anchor Shackle Fehr Bros 1/4IN Anchor Shackle Speeco 07090800/2698 Tractor Lynch Pin
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Speeco 07091500/2709 Standard Tractor Lynch Pin SPRING SNAP STEEL ZN 3/16     Campbell T4900424 Cold Shut
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Baron 1407 Open Eye Spring Snap Midland Big Orange 081163/MC645G Anchor Shackle Campbell T4900324 Cold Shut
Baron Spring Snap, Open Eye, 9/32 in Snap Opening, 3-3/8 in Overall Length, Steel, Nickel Plated Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
Campbell T7665032 Welded Ring Speeco 07094000/00266 Round Loop PTO Locking Pin Speeco 07093900/00276 Square Loop PTO Locking Pin
Campbell Welded Ring, NO 7 Chain, 1-1/4 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity Numerous farm, lawn, and garden and industrial applications. 2-1/4 usable inches, zinc-plated.
Midland Big Orange 081213/MC646G Anchor Shackle Fehr Bros 5/16 Anchor Shackle Campbell T4900524 Cold Shut
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
BREACHING SNAP ZN 2-1/2       Campbell T7661152 Welded Ring Campbell T7665042 Welded Ring
. Campbell Welded Ring, NO 3 Chain, 2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity Campbell Welded Ring, NO 3 Chain, 1-1/2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
Campbell T7660841 Welded Ring Baron 2450-1/4 Snap Link SPRING SNAP RNDEYE SWVL 3/8
Campbell Welded Ring, NO 4 Chain, 1-1/4 in Length X 0.22 in Wire Size, Steel, Zinc Plated, 200 lb Load Capacity WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device.
Campbell T4900624 Cold Shut SNAP LINK 9/32                SPRING SNAP RNDEYE SWVL 3/4
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device.
   
 
1 2 3 ... 18