Home > POWER TOOLS & ACC > POWER TOOLS > HOBBY TOOLS/ENGRAVERS
Sort By:
1 2 3 4
Dremel 560 Cutting Bit Dremel 402 Mandrel Dremel 429 Felt Polishing Wheel
Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM. To be used with all cutting wheels, sanding discs and polishing wheels. Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM.
Dremel 432 Drum Sander Band Dremel 422 Felt Polishing Tip Dremel 430 Drum Sander Band
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM. Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM.
Dremel 408 Drum Sander Band Dremel 8193 Grinding Stone Bosch Accessories 113 Engraving Cutters
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM.
Dremel 932 Grinding Stone Dremel 952 Grinding Stone Dremel 480 Collet
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237.
Dremel 83322 Grinding Stone Dremel 481 Collet Dremel 462 Polishing Point
Industrial abrasive made for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non ferrous metals or for working with conical and flat surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. Rubber polishing points are impregnated with abrasive and used on on ferrous metals to remove rough areas, small burrs and scratch marks. Point is ideal for cleaning and defining grooves.
Bosch 431  Oscillating Tool Accessories EZ-Lock 423E/423 Polishing Wheel Dremel 561 Spiral Cutting Bit
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4" bit diameter (6.4 mm). Pack of 6. Polish silverware to high luster, car detailing and restore door and window hardware. Compatible with all Dremel rotary tools, EZ402 EZ Lock mandrel and standard 402 mandrel (619.9400). Do not run in excess of 30,000 RPM. Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. Do not run in excess of 30,000 RPM.
Dremel 540 Cut-Off Wheel Dremel 512E Finishing Abrasive Buff Dremel 407 Drum Sander Band
Easily cuts off slots bolts, screws, sheet metal, thin wood and plastic, trim castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No. 402 mandrel. For cleaning, light sanding and removing tarnish from brass. Use on metal, glass, wood, aluminum and plastics. For use with the EZ402 EZ lock mandrel (SKU #482.4447) or standard 402 mandrel (SKU #619.9400). Includes 2 fine 320 grit buffs. Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM.
Dremel 454 Precision Ground Sharpening Stone Dremel 455 Precision Ground Sharpening Stone Bosch 90930 Carbon Motor Brush
Used for sharpening chain saw blades, quickly and easily. Used for sharpening chain saw blades, quickly and easily. For No. 275, No. 285, and No. 395 Type 3, 4 and 5 Moto-Tools.
Dremel 453 Precision Ground Sharpening Stone Dremel 953 Grinding Stone Dremel 199 High Speed Cutter
Used for sharpening chain saw blades, quickly and easily. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
Dremel 420 Cut-Off Wheel Dremel 118 High Speed Cutter Dremel 124 Rotary Tool Bit
For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
   
 
1 2 3 4