Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > TORCHES / SOLDERING
Sort By:
1 2 3
Weller 7250W Standard Soldering Tip Nokorode Aqua Flux 74047 Paste Flux Weller SP25NKUS General Duty Corded Soldering Iron Kit
Made of copper, for Weller soldering guns. Specs: Tip Width O/D .22 in.; Reach/Length 2.57 in. Creamy, smooth paste formulated to meet ASTM B-813 specifications. Water washable, so it can be flushed from the piping system to limit corrosion. Lead-free and may be used with all types of soft solder including 95/5, 60/40, 50/50 and 40/60 solders. Will not run or drip off acid brushes, pipes and fittings during application. Superior wetting ability allows solder to flow easily and uniformly into joints. Pre-cleans and resists splattering. Conforms to ASTM B-813 specifications. For hobbies, kits and radios. Stainless steel barrel with heat and impact resistant pencil handle. With on/off indicator light. Contains No.SP23 soldering iron, three 1/8" diameter nickel-plated copper iron tips, lead-free solder, and soldering aid tool. Tips develop 750 degrees Fahrenheit and include No.MT1 cone-shaped, No.MT2 screwdriver, and No.MT3 chisel tips. Helpful hints and instructions on card. 8-1/4"L, 120 Volts, 25 watts, 50/60 Hz. U.L. Listed.
Oatey 30712 Acid Brush Safe-Flo 50683 Wire Solder Kit Oatey 53017 Lead Free Soldering Paste Flux
Use for applying liquid or paste fluxes. Alloy of tin, silver, copper and bismuth. Meets requirements of Safe Drinking Water Act for use on copper potable water lines. Provides excellent flow and fill characteristics. 420 to 460 degrees Fahrenheit melting range. Includes 8 oz. solid wire solder 0.117" diameter, 1.7 ozs. No.95 lead free tinning flux, acid brush, sand cloth, and how-to instructions. Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder.
Safe-Flo 29025 Wire Solder Oatey 30710 Acid Brush Oatey 30011 No. 5 Paste Flux
Alloy of Tin, Copper, Silver, and Bismuth that works much like 50/50 solder. Recommended for use on potable water systems for sweating copper joints. Also effective on stainless steel, brass alloys, chrome alloys, galvanized steel and cast iron piping.  Works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics. 420 to 460 degrees F melting range; 0.117" diameter. Meets ASTM standard B-32 and the requirements of Safe Drinking Water Act. Can Not Be Used On Aluminum. Use for applying liquid or paste fluxes. Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder.
Weller Professional D550 Corded Soldering Gun Weller Featherweight Corded Soldering Iron Weller SP40NUS Lightweight Corded Soldering Iron
High output with 2-position trigger selection of dual heats. Heavy-gauge, high efficiency, tin-plated copper tip comes up to temperature in 6 seconds. Balanced pistol-grip design with twin lights to illuminate work and 2-wire cord. Includes soldering hints booklet. 120 Volts, 260/200 watts, 50/60 Hz. U.L. Listed. For hobbies, kits and radios. Stainless steel barrel, heat and impact resistant pencil handle. Includes No.MT1, 1/8" diameter replaceable nickel-plated copper tip that develops 750 degrees Fahrenheit. 8-1/4"L, 120 Volts, 25 watts, 50/60 Hz. U.L. Listed. For hobby and electronic work. Stainless steel barrel, heat and impact resistant pencil handle. Includes No.MT10, 1/4" diameter, replaceable nickel-plated copper tip that develops 900 degrees Fahrenheit. 8-1/4"L, 120 Volts, 40 watts, 50/60 Hz. U.L. Listed.
Weller SP80NUS Corded Soldering Iron Weller SP15NUS Lightweight Corded Soldering Iron Kit Oatey 21212 Rosin Leaded Core Solder
For hobby work, stained glass and minor repairs. Stainless steel barrel with heat and impact resistant handle. Includes soldering iron rest and No.MT20, 3/8" diameter, replaceable nickel-plated copper tip that develops 900 degrees Fahrenheit. 9-3/4"L, 120 Volts, 80 watts, 50/60 Hz. U.L. Listed. Pencil-thin for fine soldering and hobby work, small or intricate jobs such as electronics kits, model railways and jewelry making. Stainless steel barrel, heat and impact resistant handle. Includes No.MT70, 1/8" diameter, replaceable, nickel-plated copper, cone shaped tip that develops 750 degrees Fahrenheit. 7"L, 120 Volts, 12 watts, 50/60 Hz. U.L. Listed. 40 percent tin and 60 percent lead alloy with non-corrosive and non-conductive core flux for electrical and electronic soldering such as appliance repair, radio, TV, wiring motors and non-drinking water lines; melting range of 361 to 460 degrees F.
Oatey 21018 Wire Solder Oatey 20019 Wire Solder Bernzomatic 333251 Oxygen Cylinder
Alloy of 40 percent Tin and 60 percent Lead; 361 degrees F-460 degrees F melting range. Commonly used for tin plating, seaming joints, copper DWV systems and sheet metal repair. Contains lead, NOT for plumbing applications. Alloy of 50 percent tin and 50 percent lead, use with Oatey #5 paste or liquid flux. Used for sheet metal, galvanized gutters, general repairs and non drinking water lines. Not to be used for plumbing. .125" gauge. Contains lead, NOT for plumbing applications. Oxygen cylinders have a CGA 601 valve with left-hand threads. Cylinders are designed to meet Title 49 CFR DOT specification 39 primarily for containing liquefied gas.
Nokorode 14030 All Purpose Regular Paste Flux Oatey 53185 Rosin Core Wire Solder Copper Lock 10-800 No Heat Solder
Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Alloy of 60 percent Tin and 40 percent Lead; no external flux is needed. 361 degrees F ? 375 degrees F melting range. Can be used for electrical applications including wiring and other fine electronic work. Contains lead. Not for use on drinking water lines. Fast, easy, permanent; apply inside the copper connector, fit in the copper pipe and within seconds a permanent leakproof seal will occur.  Pressure may be applied after two minutes; can withstand pressures up to 500 PSI; can withstand temperatures from -60 degrees F to +300  degrees F. Meets US Military specifications. Good with all refrigerants.
Oatey 20015 Leaded Core Solder Oatey 53016 Rosin Core Solder Copper Lock 10-801 No Heat Solder
Alloy of 50 percent tin and 50 percent lead. General purpose solder for sheet metal work, auto radiator repair and steel gutters. Not to be used on drinking water lines. .125" gauge. Contains lead, NOT for plumbing applications. 40 percent tin and 60 percent lead alloy with non-corrosive and non-conductive core flux for electrical and electronic soldering such as appliance repair, radio, TV, wiring motors and non-drinking water lines; melting range of 361 to 460 degrees F. Fast, easy, permanent; apply inside the copper connector, fit in the copper pipe and within seconds a permanent leakproof seal will occur.  Pressure may be applied after two minutes; can withstand pressures up to 500 PSI; can withstand temperatures from -60 degrees F to +300  degrees F. Meets US Military specifications. Good with all refrigerants.
Oatey 21305 Bar Solder Safe-Flo 53062 Wire Solder Oatey No. 95 Tinning Flux
Alloy of 50 percent Tin and 50 percent Lead; 361 degrees F ? 421 degrees F melting range. For use with copper drain piping, tin plating, seaming joints and sheet metal. Not for use on drinking water lines. Alloy of tin, silver, copper and bismuth. Works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics with a melting range of 420 to 460 degrees F;  0.117" diameter. Used for tin plate work, sheet metal seaming, and hot water heating lines. Meets requirements of Safe Drinking Water Act for use on copper potable water lines. With Oatey silver solder powder added to pre-tin copper pipes. Cleans, fluxes and tins. Lead free, can be used on potable water systems. For clean sweat copper fittings, no pre-cleaning needed. Do not use on electrical parts. Formulated with the same quality as Oatey No.5 flux. Will work for large diameter copper and does not turn copper green. Can never burn out.
Safe-Flo 29024 Wire Solder Safe-Flo 53061 Wire Solder Oatey 22018 Lead Free Plumbing Solder
Alloy of Tin, Copper, Silver, and Bismuth that works much like 50/50 solder. Recommended for use on potable water systems for sweating copper joints. Also effective on stainless steel, brass alloys, chrome alloys, galvanized steel and cast iron piping.  Works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics. 420 to 460 degrees F melting range; 0.117" diameter. Meets ASTM standard B-32 and the requirements of Safe Drinking Water Act. Can Not Be Used On Aluminum. Alloy of tin, silver, copper and bismuth; works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics with a melting range of 420 to 460 degrees F;  .084" diameter. Used for tin plate work, sheet metal seaming, and hot water heating lines. Meets requirements of Safe Drinking Water Act for use on copper potable water lines. Lead free alloy of 95 percent Tin and 5 percent Antimony. Most commonly used where frequent and extreme temperature changes and vibrations occur. Meets the requirements of the Safe Water Drinking Act; 450 degrees F ? 464 degrees F melting range.
   
 
1 2 3