Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > LUBRICANTS & FLUIDS
Sort By:
1 2 3 ... 12
Super Clean 101723 Industrial Strength Cleaner/Degreaser Plews 75-072 Funnel with Fine Mesh Strainer Screen Sta-Bil 22240 Marine Formula Fuel Stabilizer
Industrial strength formula quickly removes tough, caked-on grease, oil, wax, tar, and dirt on contact. Avoid prolonged contact with aluminum and painted surfaces. Avoid any contact with exterior car surfaces, motorcycles, wheels, and glass. Wear rubber gloves and eye protection. Rinse thoroughly. Do not allow to dry on any surface. Dispose of cleaning residue in accordance with local, state and federal laws and regulations. Avoid freezing. Rugged, corrosion resistant all purpose polyethylene plastic funnel with fine mesh straining screen and hanging tab. 6 quart capacity indicates what the funnel will hold when the outlet is blocked. Quick measure, easy pour bottles. Top selling marine fuel additive ethanol treatment and performance improver. Prevents corrosion from moisture and ethanol-induced water attraction. Contains double the corrosion preventers and more than four times the fuel system cleaner than in regular STA-BIL. Use at every fill up to protect against corrosion and deposit build up in marine engines.
Quaker State 550024110 Full Synthetic Motor Oil Sta-Lube Sta-Plex SL3190 Extreme Pressure Grease Rain-X RX11806D Windshield Washer Fluid Additive
Protection against engine friction related wear, especially as temperatures increase. Improved resistance to engine stress at high rpm and under heavy loads. Resistance to thermal and viscosity breakdown. Superior lubrication at low and high temperatures. One quart. Certified lithium complex based NLGI #2. Contains extreme pressure, anti-wear, and anti-oxidation additives. For high temp and performance applications. Red semi-solid to solid with faint odor. 60-Lb. Timken OK load. -20 to 325 degrees Fahrenheit working temp, 500 degrees Fahrenheit drop point. GL LB Approved. Professional strength cleaning compound. Removes tar, bug residue, wax, oil and mineral deposits. Can be used on glass and chrome.
Plews 75-008 Tractor Lock-On Funnel with Screen and Tabs Xtreme Blue Summer Blend 30297 Windshield Washer Fluid Hopkins 5080 Rectangular Less Mess Drain Pan
Steel galvanized lock-on tractor funnel with screen and tabs. 8 Quart capacity indicates what the funnel will hold when the outlet is blocked. Removes road grime, film and bugs. Specially formulated for summer use. Safe for all auto finishes. Use full strength. No mixing required. Provides burst protection to 32 degree Fahrenheit. Designed to capture the full stream of an oil change. Oil filter stand allows for complete filter draining and keeps it out of the oil. Tough structure, sturdy handles on all sides and a corner pour feature. Holds up to 11 quarts of oil. Unit dimensions: 22.50" x 12.5" x 4".
Permatex 81343 Anti-Seize Lubricant Hopkins 11837 Recovery Oil Drain Pan Sta-Lube SL3121 Bearing Grease
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly. Temperature range: -60 to 1,600 degrees Fahrenheit. Salt, corrosion and moisture resistant for marine use. For easy removal of spark plugs, cylinder head and exhaust head bolts. Meets Mil Spec #907E, Level 3 NFPA Fire Code. Tube, carded. For easier, cleaner oil changes. Large opening, plug-saver screen retrieves drain plug. Built-in hand grips for carrying, pouring, and dispensing. Resistant to chemicals and solvents; will not rust, dent, or corrode. A blue, tacky, aluminum complex NLGI Number 2 grease, using a highly refined base oil. Formulated with a polymer to provide adhesive, non-blend, and water washout characteristics. Will resist water under the most severe conditions. Dark semi-solid to solid with faint odor. 0 to 325 degrees Fahrenheit working temp, 500 degrees Fahrenheit drop point.
Warren Unilube 52616 Grease Rhinogear 5064 Large Funnel 8-3/4 in H x 7-1/2 in W x 7 in D Plews 75-441GS Measure Can With Spill Proof Top 6-1/2 in H
Multi-purpose NLGI number 2 lithium stearate base grease. Highly water resistant and suited for normal temperature and speed conditions. Suitable for use for drum-type wheel bearings, chassis, springs, water pumps, bearings and general lubrication. Not recommended for disc brake wheel bearings. Made of tough, high-density polyethylene for dispensing petroleum-based fluids. May be used with multiple substances such as oil, radiator fluid or fuel additives. Deluxe galvanized measure with spill proof top. Flexible spout for ease of pouring. Rolled edge, easy grip handle. Calibrated fill line.
Golden Rod 505 Spring Bottom Oiler Golden Rod 606S Pistol Pump Oiler Golden Rod 120 Pump Oiler With Precision Ground Piston
Double-seamed spring steel bottoms plus roll-threaded filler openings for leak-proof body-to-spout connection. 4-1/2" tapered spout. Plastic container for value and POP appeal. Pump stays primed for instant use. 6" flexible spout holds position indefinitely. Precision machined. Replaceable parts throughout. Screw cap filler opening. Interchangeable spout. Zinc-die cast high pressure pump. Delivers a drop or stream of oil. Stays primed for instant use. Powder-coated copper bronze finish. Use replaceable spout 10" No.301024 (SKU 638.6957) or 15" No.301026 (638.7450).
Lubrimatic 10-214 Economy Flexible Grease Gun Hose Golden Rod 707 Pump Oiler With Precision Ground Piston Plews 75-007 Utility Funnel with Screen
For use on hand operated grease guns only. Steel 1/8" NPT male fittings on each end. For industrial applications. Steel with double seamed or drawn steel bases. Plated top cap and handle assembly with removable 8" spout. Die-cast high-pressure pump with precision ground piston to deliver a drop or stream of oil. Stays primed for instant use. Powder-coated copper finish with zinc-plated top cap. All-purpose fluid dispenser, works well for transmission fluid. Galvanized steel, includes strainer screen and 12" flexible metal extension with tapered tip for hard to reach spots. 17-1/2" overall length.
Blaster 128PB Penetrating Catalyst Coastal 45015 Hydraulic Oil Specialist 300028 Grease
Breaks free rusted or frozen parts caused by rust and corrosion. Contains a non-evaporating lubricant to protect against further rust and corrosion. Use on automotive, industrial, marine, plumbing and other equipment. Blended with highly refined naphthenic base oils and an additive package that provides excellent antiwear protection and inhibits rusting and corrosion. Also suppresses foaming and air entrainment. Also available in ISO grades (46, 68 and 100) to satisfy the varying requirements of vane, gear, and piston pumps. Long lasting lubrication and rust inhibiting barrier. For metal-to-metal applications, preventing rust and corrosion. Sprays on evenly as a liquid and sets dry for a thick, protective coating that will not wash off. Temperature range 0 to 300 degrees F. For use on auto hinges, gears, sprockets, outdoor hinges, latches, overhead door tracks, pulleys, cables, and guide rails and for lubricating equipment before placing in storage. 50-state VOC compliant.
Lubrimatic 05-028 Standard Jaw Hydraulic Grease Gun Coupler CRC 5037 High Quality Grease Plews 50-347 Hand Held Rigid Pump Oiler With 1/2-20 Thread Base
For hand-operated lube equipment only. 4,500 PSI recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8" NPT threads. High-purity, NLGI Grade 2. Provides lubrication and durability in any weather. Versatile, designed for applications requiring a long grease life. Off-white viscous grease with solvent odor. 0 to 300 degrees Fahrenheit working temp. Aerosol can. Heavy duty, drawn steel body. Durable epoxy finish resists rust. Zinc plated, detachable 9" flex spout with 1/2"-20 thread base. Detachable tip, threaded 10-32 with closure cap.
Tri-Flow 21010TF Penetrating Lubricant Sta-Lube SL3120 Bearing Grease Hopkins 11838 Recovery Oil Drain Pan
Penetrates quickly, displaces moisture, reduces friction and wear on moving parts, protects against rust and corrosion. Reduces buildup of dirt, dust, and abrasive particles. Loosens rusted parts, frees sticky mechanisms. Contains high-grade petroleum oils, micronized Teflon, and other ingredients to soften and remove dirt and corrosion, and keep equipment operating at its peak under heavy load, high wear, and severe temperature extremes. Use on bearings, rollers, drive chains, gears, locks, winches, shafts, sprocket housings, cables, tolls, conveyors, bolts, hinges, and cranks. Brown with a mild, fruity odor. Non-staining, safe on metal, wood, plastic, and rubber.  Squeeze bottle. A blue, tacky, aluminum complex NLGI Number 2 grease, using a highly refined base oil. Formulated with a polymer to provide adhesive, non-blend, and water washout characteristics. Will resist water under the most severe conditions. Dark semi-solid to solid with faint odor. 0 to 325 degrees Fahrenheit working temp, 500 degrees Fahrenheit drop point. For easier, cleaner oil changes. Large opening with spout for easier pouring and dispensing. Molded handle for convenient carrying. Also for draining antifreeze or transmission fluid. Resistant to chemicals and solvents; will not rust, dent, or corrode. Holds up to 3 oil changes. Black with black closure and spout.
   
 
1 2 3 ... 12