Home > HAND TOOLS > STRIKING AND CUTTING TOOLS > RIPPING/CHISELING
Choose a sub category:
WRECKING BARS PRY BARS AND PULLERS PINCH BARS
NAIL & TACK PULLERS NAIL SETS COLD CHISELS
PUNCHES & DRIFTS COLD CHISEL/PUNCH SETS HOLE PUNCHES
AWLS AND BRAD DRIVERS
Sort By:
1 2 3 ... 5
PRY BAR DBL END NAIL PLLR 11IN Dasco 400-0 Cold Chisel Wonder Bar 55-515 Flat Pry Bar
Made from drop forged and heat treated steel with hexagon steel construction for strength. Use for precision nail pulling and prying. Made from heat treated, high carbon American steel with a target head that reduces spalling and mushrooming. Used for cutting, shaping and removing metal softer than the cutting edge such as cast iron, wrought iron, steel, bronze and copper. Made from forged, heat treated, high-carbon steel with polished and beveled cutting edges. Contoured bar makes pulling nails, prying, lifting and scraping easier. Beveled nail slot at both ends. High visibility, powder coated finish.
Vaughan & Bushnell 222 Double Ended Mini Pry Bar Crescent 56 Nail Puller DeWalt DWHT55131 Double Ended Wrecking Bar
High quality tempered steel. Rust-resistant powder coat finish. Rocker head provides additional leverage. Beveled nail slots. Made from a forged alloy, hardened and tempered jaw, box-joint and 24 inch full extension. Black enamel finish. Conforms to U.S. Fed. Spec. GGG-P-79lb, Type 1, Class-1. Rounded 90 degree prying end for leverage and prying; tri-lobe design for comfort and strength; multiple nail pullers for flexibility and nail removal; pointed beveled ends for penetration and nail pulling.
BAR UTILITY 30 INCH LGTH      Vulcan 32937 San Angelo Bars Vaughan & Bushnell BC9 Bear Claw Double Ended Bear Claw Nail Puller
Multi-purpose demolition tool made of one piece forged steel with a sledge hammer face, ripping hook and a textured grip. Weighs 8.5 lbs. Drop forged and heat treated for superior strength during prying, digging and tamping. Hexagon steel construction for enhanced strength, one inch blade width. Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish.
FatMax 55-101 Wrecking Bar Stanley 16-287 Cold Chisel DeWalt DWHT55132 Double Ended Wrecking Bar 42 in L
Made of forged, high-carbon steel able to withstand 975 ft-lbs. of bending momentum; with a slotted claw, beveled ends and high-visibility, powder-coated finish. Used to cut  or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Rounded 90 degree prying end for leverage and prying; tri-lobe design for comfort and strength; multiple nail pullers for flexibility and nail removal; pointed beveled ends for penetration and nail pulling.
Stanley 16-298 Cold Chisel Set BAR WRECK 8LB 42IN LGTH       Vulcan 32944 Wrecking Bars
Made of one piece forged chrome vanadium steel. Hardened, quenched and tempered for long life and safety. Powder coat finish for increased visibility. Set contains (1) each:  3/8", 1/2" & 5/8". Bar is drop forged and heated for superior strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Bar is drop forged and heated for superior strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
FatMax 16-332 Handguarded Cold Chisel Dasco 606-0 Drift Punch Vaughan & Bushnell BT90 90 deg Double Ended Pry Bar
Made with offset blade and shorter bite for increased leverage; bi-material hand guard; used for cutting and shaping wrought iron, cast iron, steel, brass, bronze, copper, aluminum, bolts, nuts and rivets. Made of heat treated high carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Targethead" render long service. Made from forged spring tempered steel with a 90 degree blade. Used for prying, pull nails, molding, and scraping.
General Tools 70079 Utility Center Punch Vulcan 32946 Wrecking Bars Dasco 22 Pin Punch Kit
Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling, one handed operation, no hammer needed. Bar is drop forged and heated for superior strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Made of heat treated, high carbon American steel. Used for driving and removing pins and keys. Includes (1) each Nos: 562 3/32" x 5-1/2" Starter Punch, 582 1/8" x 5-1/2" Pin Punch, 583 5/32" x 5/1/2" Pin Punch, 584 3/16" x 5-1/2" Pin Punch, 589 1/4" x 6" Pin Punch and 592 1/16" x 4/12" Pin Punch.
Dasco 30 Punch and Chisel Kit Dasco 253-0 Roll Pin Punch Dasco 255-0 Roll Pin Punch
Made of heat treated, high carbon American steel. Set contain (1) each:  Nos.: 402 3/8" x 5-5/8" Cold chisel, 406 5/8" x 6-3/4" Cold chisel, 532 7/16" x 5" Center Punch, 562 5-1/2" Long Starter Punch and 582 1/8" x 5-1/2" Pin Punch. Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft. Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft.
Vaughan & Bushnell BC8 Bear Claw Double Ended Bear Claw Nail Puller Superbar B215L Double Ended Pry Bar Vaughan & Bushnell 222CS Double Ended Mini Pry Bar
Made of forged, tempered steel with flat claws that slip easily under nail heads and a rocker head that provides leverage. Black, rust-resistant finish. Made from forged spring tempered steel for heavy duty use with three beveled nail slots; polished, sharp blades for easy insertion. Used for prying molding, scraping and pulling nails. Blue coated finish. High quality tempered steel. Rust-resistant powder coat finish. Rocker head provides additional leverage. Beveled nail slots.
Stanley 55-818 Ripping Chisel Estwing HC-10 Single Ended Handy Claw Dasco 88 Punch and Chisel Kit
Extra wide claw. Beveled nail slot. Made from drop forged hard steel with a vinyl grip. Removes imbedded nails. Contains 5/16", 5/8", 3/4" cold chisels; 1/16", 1/8", 5/32", 3/16", 1/4", 5/16" pin punch; 1/4" center punch; 3/8" prick punch and 7" scratch awl; scratch awl is ideal for starting screw holes; cold chisels are used for cutting and shaping metal that is softer than the cutting edge; pin punches are used to remove a pin or key; center punches are used for making accurate hole starting easier and prick punches are used to mark and scribe work pieces. Made of high carbon heat treated American steel.
   
 
1 2 3 ... 5