Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR
Sort By:
1 2 3 ... 6
Oatey 43561 Snap-In Floor Drain Oatey 42042 Tile Rings Oatey 43569 Snap-In Floor Drain
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. 4-1/4"  x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
Oatey 43565 Snap-In Floor Drain Danco 80001 Tub Spout Ring Screw-Tite 42358 Replacement Strainer
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID. For screw-on tile shower drains, 4" snap-in drains and 2" or 3" general purpose drains. Replacement for Oatey 42210, 42213, 42399, 42404, 42218, 42219, 43566, 43567, 43580, 43581, 43578, 43579. Bagged.
Danco 80002 Tub Spout Ring Plumb Pak PP826-64 Strainer Dome Cover Plumb Pak PP826-4 Flat Tub Overflow Washer
Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID. Strainer dome cover with screw. Plumb Pak Tub Overflow Washer, Flat, Sponge
Plumb Pak Water Saver Economy Showerhead Plumb Pak PP22612 Face Plate Screw Plumb Pak Water Saver Economy Showerhead
Installs to standard 1/2" shower arms. 2.0 gpm flow rate. Chrome plated face plate screws. Adjustable Spray. Installs to standard 1/2" shower arm. 2.5 GPM flow rate.
Mintcraft B1140WH Shower Arms Plumb Pak PP825-50 Shower Drain Grid Plumb Pak PP606-23 Clevis Plunger Linkage Assembly
Standard 1/2", Plastic. Overall length 7". 3-5/16" O.D. 6.88" h x 4-3/4" w. For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger.
B & K 133-106 Shower Drain World Wide Sourcing 24500 Bathtub Spouts Oatey 42787 Shower Drain
For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid. Zinc body; chrome plated finish with reducer bushing. For 3/4'' or 1/2'' pipe. 2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
Plumb Pak PP825-7 Shower Arm Diverter World Wide Sourcing 24354 Bath Drain Trip Levers Mintcraft B1140CP Shower Arms
Shower arm diverter, plated plastic, connects personal shower and shower head. 1/2" F.I.P. x 1/2" M.I.P. x 1/2" M.I.P Zinc body. Screws included. Standard 1/2", Plastic. Overall length 7".
World Wide Sourcing PMB-020 Shower Adapters Danco 80991 Round Bath Drain Overflow Plate With Lever Plumb Pak PP825-8 Shower Adapter Control
Shower flow adjuster. 1/2" IPS. Includes screws. 2" center to center holes. Carded. Plated plastic. Flow control and shut off.
Plumb Pak PP863-50 Replacement Tip Toe Cartridge Plumb Pak PP826-10 1-Hole Trip lever Style Tub Face Plate Oatey 42097 101 PS Shower Drain
Threaded shaft. Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Chrome Plated Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
Whedon TV1C Shower Flow Controller Plumb Pak PP826-11 2-Hole Trip Lever Style Tub Face Plate Oatey Snap-Tite Round Drain Strainer
Installs easily between standard shower arm and head.  Push button control easily adjusts spray force from full to a trickle, great for saving while lathering, shampooing, etc. Made in USA Plumb Pak Tub Face Plate, 2-Hole, Blank Overflow, Suitable For Use With: Bath Drain, Chrome Plated 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded.
   
 
1 2 3 ... 6