Home > ELECTRICAL > ROUGH ELECTRICAL > OUTDOOR BOXES & LAMPHOLDERS
Sort By:
1 2 3 ... 6
Bell Raco 5606 Lampholder Bell Raco 5333-0 Weatherproof Box Bell Raco 5141-0 Weatherproof Switch Cover
Die cast zinc with porcelain socket. For wet locations. Use 75-150 watt maximum, Par-38 lamps. Includes gaskets and locknuts. UL Listed. With lugs. Die cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box, or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Three 1/2" threaded outlets. Powder coat finish. 32 cubic inch capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 4-1/2" x 4-1/2" x 2" deep. UL Listed, CSA Approved and NEMA 3R Rated. Weatherproof protection for an "on-off" type switch. Vertical, mounted to device. Rugged die cast construction, powder coat finish. Self-closing lid assures weatherproof protection when not in use. Supplied with a switch - no need to purchase separate components. Switch is unassembled to the cover. UL, CSA and NEMA 3R rated. Shrink wrapped.
Bell Raco 5103-0 1-Hole Weatherproof Device Cover Hubbell 5175-5 Blank Weatherproof Cover Bell Raco 5180-7 2-Hole Weatherproof Device Cover
Includes installation hardware, gasket, and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped. For use whenever weatherproof protection is required for a weatherproof box. Rugged die cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL Listed, NEMA 3R Rated. 4-1/2" x 4-1/2". Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. Size: 4-1/2" x 2-3/4". UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated.
Bell Raco 5101-2 1-Hole Weatherproof Device Cover Arrow Hart WIU-2 Self-Closing Weatherproof Cover Bell Raco 5337-1 Weatherproof Box
For outdoor horizontal use. Powder coat finish. Scratch resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18  NEMA 3R rated. UV Resistant polycarbonate back, see-through cover and pre-mounted gasket protect devices inside from rain, sleet and snow without cracking or breaking. Non-corrosive and non-conductive. Snap-in inserts provide flexibility. Meets and exceeds UL outdoor low voltage landscape lighting requirements. Meets 1999 NEC Article 210-60 (b) for hotels and motels requiring covered receptacles behind beds, and 2002 NEC Article 406.8 (B) (1) for receptacles in damp or wet locations. Comes standard with three inserts (for a total of 16 different configurations. 3.25" deep x 6.5" length x 5.75" width. For use in branch circuit wiring in wet, damp, or dry locations. Can be used as a weatherproof junction box, or as a housing for receptacles, switches and GFCIs. Die cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Five 1/2" threaded outlets. 31.0 cubic inch capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2" depth x 4-1/2" length x 4-9/16" width. Multi-lingual instructions. UL Listed. NEMA 3R Rated.
Bell Raco 5180-1 2-Hole Weatherproof Device Cover Arrow Hart S1962 Utility Halogen Low Profile Weatherproof Cover Carlon E9G2DSN-CAR Weatherproof Device Cover
Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. Size: 4-1/2" x 2-3/4". UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. Tough plastic construction, resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. UL Listed for damp locations. Stay open lids. Size 2-3/4" x 4-1/2". For two gang duplex receptacles and weatherproof toggle switch applications.
Arrow Hart S1962W-SP Weatherproof Cover Bell Raco 5361-2 Splice Box Arrow Hart 1113-SP 3-Hole Weatherproof Outlet Box
Tough plastic construction, resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. UL Listed for damp locations. Stay open lids. Size 2-3/4" x 4-1/2". For use in branch circuit wiring in wet, damp, or dry locations. Designed for use as a weatherproof junction box, and used with Bell round cluster covers and round lampholder combinations. Die cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included, and installed ground screw. 16.1 cubic inch capacity. Six 10-24 tapped holes. 4" diameter x 1-1/2" depth. UL Listed. Electrostatically painted with a baked, weather-resistant powder finish. Accept single gang weatherproof covers and standard FS covers. Mounting lugs provide strength and durability on any mounting surface. Raised knockout studs on back of box provide alternative means for wall mounting. Strike desired studs with sharp hammer blow for clean mounting holes. Ground screw hole located inside back wall of box. Threaded outlets for conduit and connectors. Two closure plugs and mounting lugs furnished. Three holes, one at each end and one on the back. 2" depth x 2.812" width x 4.562" length. UL Listed. Carded.
Raco Rayntite 5775-0 Multi Directional Weatherproof Cover Bell Raco 5173-2 Blank Weatherproof Device Cover Bell Raco 5197-2 Round Cluster Cover
High-impact polycarbonate construction, virtually indestructible, will not rust or corrode. 2-3/4 inch depth, 2 gang, pre-configured for GFCI with patented Knockout technology for alternate devices. 55 in 1 multiple combinations of duplex, GFCI, switch, and rounds: 1-1/4", 1-3/8", 1-9/16", 1-5/8", 1-11/16", 1-3/4, 2-1/8", 2-1/4", 2-7/16". Clear lid. Lockable design prevents tampering and accidental disconnects. Tri-lingual instructions. Includes attached gasket and mounting hardware. 5.54" x 5.43". Meets NEC requirements, UL Listed. NEMA 3R Rated. Shrink wrapped. Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket, and multi-lingual instructions. C/UL/US UL Listed. NEMA 3R rated. For wet locations. Gasket, screws and plugs included. 4" cluster cover. Die cast zinc. Three 1/2" NPT holes. UL Listed.
Bell Raco 5624-1 Combination Weatherproof Lampholder Carlon E9G2SSNR Weatherproof Cover Bell Raco 5189 Rectangular Cluster Cover
Die cast zinc round 4" cover and lampholder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket, and multi-lingual instructions. Uses 75-150 watt maximum, Par-38 lamps, not included. UL Listed 1598 C/UL. Weather resistant cover for double toggle switch applications. Vertical mount. UV resistant, suitable for outdoor use. Nonmetallic/noncorrosive, won't rust or fade, paintable. UL Marine Listed, CSA Certified. Includes installation hardware, gasket, and multi-lingual instructions. 3 hole covers are supplied with two closure plugs. Die cast zinc construction. Three 1/2" NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant.
Arrow Hart S992 Weatherproof Cover Arrow Hart S989-SP Weatherproof Cover Bell Raco 5406-0 Weatherproof Extension Box
For single devices, take either single receptacle or switch. Corrosion resistant materials suitable for exposure to weather. Gaskets provided to seal cover edges and openings. Mount on flush or surface single gang boxes. Gray color. UL Listed. Polybagged. Corrosion resistant materials suitable for exposure to weather. Gaskets provided to seal cover edges and openings. Corrosion resistant mounting screws included. Mount on flush or surface single gang boxes. UL Listed. Used to provide additional capacity. Die cast aluminum construction. Installation hardware, gasket, and ground screw provided. 9.5 cubic inch capacity. 4-1/2" x 2-3/4" x 1" deep. UL Listed, CSA, NEMA 3R Rated.
Arrow Hart WIU-1 Self-Closing Weatherproof Cover Bell Raco 5320-7 Weatherproof Outlet Box Bell Raco 5625-2 Combination Weatherproof Lampholder
UV resistant polycarbonate back, see-through self closing cover and pre-mounted gasket protect against rain, sleet and snow without cracking or breaking. Non-corrosive and non-conductive. Snap-in inserts for flexibility. Moveable hinges mount either horizontally or vertically in vinyl, brick, stucco or concrete. Meets and exceeds UL outdoor low voltage landscape lighting requirements. Meets 1999 NEC Article 210-60 (b) for hotels and motels requiring covered receptacles behind beds, and 2002 NEC Article 406.8 (B) (1) for receptacles in damp or wet locations. Comes standard with three inserts (for a total of 16 different configurations): duplex, decorator and a toggle/five receptacle opening. Receptacle sizes are: 1.25" (31.75mm), 1.375" (34.925mm), 1.625" (41.275mm), 1.75" (44.45mm), and 2.125" (54.00mm). 3.25" deep x 6.085" x 4.446". UL and cUL listed, meets NEMA 3R requirements. For use in wet, damp or dry locations. Three 1/2" threaded outlets. 2" deep with lugs. May be used as a weatherproof junction box, or as a housing for receptacles, switches, and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die cast aluminum construction. 18.3 cubic inch capacity. 2" depth x 4-1/2" length x 2-3/4" width. UL Listed. NEMA 3R rated. Die cast zinc with round 4" cover and porcelain sockets. For wet locations. Use 75-150 watt maximum, Par-38 lamps, not included. Includes multi-lingual instructions, gasket, screws and plugs. UL Listed.
Bell Raco 5613 Architectural Lampholder Bell Raco 5103-1 1-Hole Weatherproof Device Cover Bell Raco 5101-1 1-Hole Weatherproof Device Cover
For indoor or outdoor lighting. Die cast zinc construction. Powder coat finish. Scratch resistant. Locking swivel knuckle assures lamp positioning and directional aiming. Porcelain socket, inside gasket. 1/2" locknut. Multi-lingual instructions. UL Standard 1598 CSA certified C22.2 no. 18 compliant. Shrink wrapped. Includes installation hardware, gasket, and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped. For outdoor horizontal use. Powder coat finish. Scratch resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18  NEMA 3R rated.
   
 
1 2 3 ... 6