Home > HAND TOOLS > MECHANICS TOOLS > PLIERS & CUTTERS & WRENCHES
Sort By:
1 2 3 ... 14
Master Magnetics 07005 Magnetic Ring Vise-Grip 2078218 Long Nose Plier Superior 04814 Straight Pipe Wrench
Made from the highest grade of ceramic magnet material available. Attach to photo frames, calendars, schedules and more to display on ferrous metal surfaces; used by crafters and teachers. Made of durable nickel chromium steel with induction hardened cutting edge that stays sharper, longer, machined jaws for maximum gripping strength. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications. Light weight, weighs nearly 40 percent less than cast iron pipe, heavy duty aluminum pipe wrench is easy to adjust and use, and safe in the toughest situations. Durable epoxy powder-coated finish. Exceeds government specification GGG651 Type II, Class C.
FatMax 89-874 High Leverage Cable Cutter Channellock 810W Adjustable Wrench Master Magnetics MFSM24RX Magnetic Sweeper
Made from drop forged from high carbon, alloy steel for long life and durability. Opposing concave cutters are hand finished and induction hardened for long life and clean cuts. Used for cutting coaxial and other soft cables. Bi-material grips provide a comfortable and secure grip. Made of chrome vanadium steel with 4 thread knurl and non-protruding jaws that provide greater capacity; minimal head width improves performance in confined spaces. Measurement scales (in. on front mm. on reverse) are handy for sizing nuts, pipe and tube diameters. Quickly drop collected scrap metal by pulling back on the release handle. Picks up 6 pounds of 8-penny nails, or approximately 600 pieces; 6" diameter rubber wheels.
Master Magnetics 07569 Flex-Extend Extra Long Magnetic Pickup Crescent Professional PS6549C Long Nose Plier Vise-Grip Fast Release Long Nose Locking Plier
Contains neodymium magnet that can retrieve heavy tools, nuts, bolts and other items that are out of reach. Features vinyl handle grip, durable aluminum tubing. Loosen knurled collar and pull bendable shaft to desired length, tighten callor to keep length. Extends from 20" to 36" . Made of chrome vanadium steel for increased durability with a heat treated joint rivet for smooth and consistent operation. Induction hardened edges for long cutting life. Compound leverage increases cutting power by 50 percent; 1/3 lighter than standard pliers, reduces fatigue. Co-molded grips for added comfort. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth are made to grip from any angle. Long, straight nose provides easy access in narrow, hard-to-reach places, no-slip ProTouch grip. Turn screw to adjust pressure and fit work, stays adjusted for repetitive use, wire cutter, and FastRelease has a no-trigger release, and offers one hand operation.
Crescent ProSeries PS5429C Compound Action Diagonal Cutting Plier Stanley 87-473 Adjustable Wrench Stanley 84-104 Fixed Joint Diagonal Cutting Plier
Made of chrome vanadium steel for increased durability, heat treated joint rivet for smooth and consistent operation and induction hardened edges for long cutting life. Edge type is Standard, cut capacity is 11 AWG. Compound leverage design that increases cutting power by 50 percent and is 1/3 lighter than standard pliers, reduces fatigue. Co-molded grips for added comfort. Tempered chrome vanadium steel wrench for fastening or holding nuts and bolts in shop or home. Rust resistant polished chrome finish and a handy hang hole for wall storage.  Exceeds ANSI specification. Carded. Made of forged steel with hardened cutting edges for durability and a rust resistant finish. Double dipped handle for comfort. Meets or exceeds ANSI standards.
Superior 04818 Straight Pipe Wrench Eklind 51608 Hex T-Key Channellock 338 High Leverage Lap Joint Diagonal Cutting Plier
Light weight, weighs nearly 40 percent less than cast iron pipe, heavy duty aluminum pipe wrench is easy to adjust and use, and safe in the toughest situations. Durable epoxy powder-coated finish. Exceeds government specification GGG651 Type II, Class C. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust; handle width is 3 inches. Made of high-carbon steel for superior performance on the job and electronic coating for rust prevention; uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life. High leverage, laser heat-treated cutting edges last longer. Channellock Blue grips for comfort. Made in USA.
Vise-Grip Fast Release Locking Plier Crescent 193610CVSMN Solid Joint Fence Tool Eklind 15208 Hex L-Key
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability with hardened teeth that are made to grip from any angle. One handed, triggerless release is easier to open, anti-pinch, non-slip ProTouch grips, wire cutter. Curved jaw puts pressure on four points. Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release. Made of forged alloy tool steel with polished head, 2 electronically induction hardened durable wire cutters, 2 staple grips in nose, and corrugated hammer head, heavy prong. Special opening in head allows both wire and staple to be gripped. Jaw type is dual head, edge type is standard; cut capacity is 11 AWG. Red non-slip cushion handle grips. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish.
Eklind 15210 Hex L-Key Eklind 15224 Hex L-Key Eklind 15104 Hex L-Key
Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish.
Eklind 15105 Hex L-Key Eklind 15108 Hex L-Key Eklind 15110 Hex L-Key
Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish. Extra torque 8650 chrome nickel alloy, heat treated for maximum strength, and rust resist finish.
Eklind 55166 T-Loop Handle Short Arm Hex Key Set Eklind 33198 T-Handle Long Arm Hex Key Set Eklind 35195 T-Handle Long Arm Hex Key Set
Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes MM sizes: 2, 2.5, 3, 4, 5, 6, and storage pouch. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes inch sizes: 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4, and storage pouch. Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust. Includes MM sizes: 2.5, 3, 4, 5, 6, and storage pouch.
Channellock 85 Fence Tool Crescent 507CVN/507CV Bevel Cut Crescent 5427CV Solid Joint Diagonal Cutting Plier
Made of high-carbon steel. Hammer on jaw, staple starter and puller and wire stretcher, splicers and 2 cutters. Channellock Blue grips for comfort. Made in USA. Used for electrical work. Made of forged alloy tool steel that is electronically induction hardened, durable and keen side cutting edges, solid joint,  and a polished head. Spring tempered handles with red non slip cushion handle grips. Made of forged alloy tool steel with electronically induction hardened hand-honed, long lasting cutting edges with a polished head. Individually tested for strength and cutting ability. Used for heavy-duty wire cutting. Edge type/cut is Standard; capacity is 12 AWG. Red non-slip cushion handle grips.
   
 
1 2 3 ... 14