Home > PAINT & SUNDRIES > SUNDRIES > HOUSEHOLD GLUES
Sort By:
1 2 3 ... 8
J-B Weld 8265S Jb Weld Cold Weld Compound J-b Weld Professional 2-Part Weld Epoxy Glue-All E1323 Glue
Bonds, fills and repairs aluminum, brass, bronze, ceramic, copper, iron, pewter, plastic, porcelain, steel and wood. For automotive, industrial, households, hobbies, farm machinery and equipment. Drying time 4 to 6 hours before handling. Not affected by gas, oil or water. One tube contains a mixture of fine steel in a liquid base. The second tube contains hardening compound. Use to fix, bond, or fill-in the shop, factory, or field. Can be formed, drilled, ground, tapped, machined, filled, sanded, and painted.  Includes two tubes. One contains liquid steel/epoxy resin, and the other contains hardener. When mixed together in equal portions, a chemical reaction occurs that turns the mixture into a compound as hard and tough as steel. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It's waterproof; petroleum, and acid-resistant; resists shock, vibration, and extreme temperature fluctuations also withstands temperatures up to 300 degrees Fahrenheit. For all porous materials, best on paper, cloth, wood, pottery, cardboard, etc. Designed for general repair and household or craft projects of consumers and light DIYers. No clog, easy-flow cap. Free flowing, dries strong, paintable. Safe and easy to use, ACMI certified non-toxic.
Dap 00694 Silicone Rubber Sealant Stanley Tools GR20 Glueshot Glue Guns Wonderlokking W2082 Tite Chair Glue
Gives a flexible seal auto and marine applications. Forms a waterproof seal.  Will not crack or shrink. Adheres to glass, fiberglass, porcelain, ceramic, canvas, painted surfaces, rubber, plastic and metal. Withstands engine heat up to 400 degrees Fahrenheit. Resist vibrations, offers elasticity, and long-life reliability. Quality performance for reliable performance. Heats up quickly and bonds within 60 seconds. Uses standard high or dual temperature glue sticks. Penetrates deep into loose joints and sets up in seconds. Eliminates loose and noisy joints found in most types of wood furniture, like chairs, tables, dressers, cabinets, stair case spindles and more. Also glues metal, rubber, most plastics and ceramics by applying to one side and assemble the other part by pressing to achieve rapid handling strength. Includes 2 applicator tips.
ITW 5 Minute Flow-Mix Automix Epoxy Loctite 233841 Instant All Purpose Adhesive 3M 5200 Fast Cure Marine Adhesive Sealant
Rapid-curing, general purpose epoxy. Starts setting in 5 minutes. Flow-Mix nozzle allows for self-mixing and no mess. Works on metal, wood, concrete, chrome, fiberglass, tiles, ceramic, glass, china and more. Bond strength 1,500 psi. Starts setting in 5 minutes. Formulated for bonding all types of glass to itself and glass to non-porous materials. Water and heat resistant. Dries clear, sets without clamping and dishwasher safe. Crystal clear. Self-piercing tube. High performance polyurethane becomes tack free in one hour and fully cures in approximately 24 hours. Retains strength above or below the water line. Stays flexible. Allows for structural movement. Absorbs stress caused by shock, vibration, swelling or shrinking. Weathering and salt water resistant.
PC Fahrenheit 25543 2-Part Hand Moldable Epoxy Adhesive Arrow TR550 Electro-Matic Glue Guns Protective Coating PC-11 Marine Grade Epoxy Adhesive
Designed to bond surfaces exposed to high heat. For quick emergency-type repairs like mufflers, engine blacks, grills, stoves, steam pipes and more. Cut, mix and apply. Allows a working time of about 8 minutes and cures for service in 60 minutes. Designed for elevated temperatures up to 500-degrees fahrenheit. Apply to clean and dry surfaces. Waterproof. Fast-setting. No sag. No Drip. Hand moldable. Can be sanded, drilled, sawed, and painted after thirty minutes. Clutch mechanism prevents glue backup. Built-in drip tray/stand. Interchangeable nozzle. Check valve controls glue flow. High volume melt chamber for fast and steady even application. Solid state P.T.C heating system develops heat quicker and holds temperature for smooth consistent bonding. Design keeps heat flow away from handle so it does not get hot. 120VAC, 40W. U.L. Listed, CSA approved. Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing.
Loctite 209741 Threadlocker Devcon S208 Epoxy Anchoring Adhesive Plastic Steel S-6 2-Part Metal Repair Epoxy
Designed for the permanent locking and sealing of threaded fasteners. Cures when confined in the absence of air between close fitting metal surfaces. Protects threads from rust and corrosion and prevents loosening from shock and vibration. Removable once cured by heating up parts to 500-degrees Fahrenheit. Use on metal fasteners up to 1" dia. The syringe gives correct amounts of resin and hardener automatically. No measuring required. Includes snap-off-snap-on cap and handy mixing paddle. Works on metal, wood, chrome, glass, concrete, fiberglass, tiles, ceramic, china and more. Sandable and paintable. Starts setting in 5 minutes. 1,500 psi bond strength. Fast curing and high strength epoxy.  When fully cured, can be drilled, threaded, tapped or filled.  Easy flow syringe with a Snap-On cap that allows for storage and reuse. Use it on all metals including steel, stainless steel, aluminum, brass, copper, iron and pewter. Fills gaps and hardens to a metallic mass. Non-flammable.
3M 5200 Marine Adhesive Sealant Devcon S-5 VersaChem Plastic Steel Epoxy Arrow AP10-4 Glue Sticks
Tack-free in 48 hours, cures in 5-7 days with no shrinkage. Remains workable with trowel or spatula up to four hours after application. Will not sag or flow in vertical or horizontal seams. For bonding and sealing: fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fitting, motors on fiberglass transoms under moldings, hull seams above and below waterline, center board trunk joints, between struts and planking, stern joints, deck housing, etc. Fast curing and high strength epoxy. When fully cured, can be drilled, threaded, tapped or filled. Contains a steel alloy that does not rust.  Use it on all metals including steel, stainless steel, aluminum, brass, iron and pewter. Non-flammable. For crafts, hobbies and general repairs. For woodworking, canvas, cardboard, ceramics, fabrics, leather, metal, plastics, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. 4" sticks break to 2" for thumb feed models. For Arrow Trigger-Feed glue guns and other popular Trigger-Feed guns.
Arrow BAP5-4 Glue Sticks Henkel Quick Set Epoxy Resin Dap 00688 Silicone Rubber Sealant
For crafts, hobbies and general repairs. For woodworking, canvas, cardboard, ceramics, fabrics, leather, metal, plastics, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. 4" sticks break to 2" for thumb feed models. For use in all 1/2" Arrow glue guns and other standard size glue guns. Two-part adhesive consisting of an epoxy resin and a hardener. Bonds in 5 minutes. Dual syringe delivers equal parts. For a wide range of materials or a s a versatile filler for gap filling, surface repairs and laminating. Can be sanded and drilled. 3,200 psi. Use to build or repair aquariums. Provides a waterproof and watertight seal. Harmless to fresh and saltwater fish when cured. Will not crack or shrink. Meets ASTM Specification C290, Class 25, Type S, Grade NS.
Sika AnchorFix-1 2-Component Anchoring Adhesive Bondo/Dynatron 03602 Weatherstrip Adhesive Glue-All E3850 All Purpose Glue
2-Component, solvent- and styrene-free adhesive. Fast-curing. For all grades of rebars, threaded rods, bolts and special fastening systems. Use to install in concrete and masonry base materials. Low sensitivity to mixing errors. Low waste. Fits a standard, good quality caulking gun. Bonds gaskets and weather stripping to metal surfaces. Withstands vibration and temperature changes. Resists oil, fuels, detergents and grease. Strong and flexible. Black. For interior home repairs and quick fixes. Bonds strong to a variety of surfaces. Goes on white, dries clear. Easy water clean-up. Non-toxic.
Franklin 6201 Wood Adhesive Titebond 6123 Polyvinyl Acetate Emulsion Translucent Wood Glue ITW Permatex 24240 Thread Locking Compound
Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for repairing hair line cracks and small defects in wood and repairing loose veneer edges. Also can be used as a finish. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 5 cps viscosity offers an assembly time of 5 seconds and an initial cure speed of 3 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 1. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested. For general household and woodworking projects. Provides a invisible glue line and bonds stronger than the wood. Strong tack and fast speed of set helps reduce clamp time. Unaffected by finishes and sands easily. Non-toxic and cleans up with water. Conforms to ASTM D-4236. All purpose medium strength thread locker. Ideal for all nut and bolt applications 1/4 inch to 3/4 inch. Protects threads from corrosion. Removable with hand tools for easy disassembly.
ITW Permatex 27140 Thread Locking Compound Elemer's E7050 Wood Glue Elmer's KG48348MR Krazy Glue Instant Adhesive
High strength thread locker for heavy-duty applications 3/8 inch to 1 inch. Well-suited for permanently locking studs and press fits. Adds 3,000 psi holding power on slip and press fit assemblies. May require heat or special tools for removal. For interior repair and building projects. Sandable and paintable. Goes on yellow, dries yellow. Water clean-up. Non-toxic. Contains precision tip applicator. Bonds metal, wood, rubber, glass, ceramic, and other surfaces.
   
 
1 2 3 ... 8